380 V 3 Tons Electric Chain Hoist with Remote Control

The operator controls the electric chain hoist using buttons on the ground, as well as a pendent (wireless) remote control in the control room. The electric chain hoist is compatible with hand-push/hand-pull monorail trolleys as well as electric monorail trolleys for fixed suspension. Numerous industries, including factories, warehouses, wind power generation, logistics, docks, construction, and others, make extensive use of 380v 3 tons electric chain hoist with remote control.

A type of lifting device called an electric chain hoist is similar to a wire rope hoist. However, they also differ from one another. 1) A different capacity for the cable-stayed—the chain hoist has a larger capacity; 2) different winding devices—the chain hoist does not exhibit disorder; 3) different mechanical principles—the lifting force of the chain hoist is more adaptable; 4) different service life—the chain hoist has a longer service life.

To improve work efficiency, the maintenance of the chain hoist is essential. 1. Please determine whether the electric chain hoist gearbox contains sufficient lubricant after 500 hours of operation. After the initial check, make sure there is enough lubricating oil in gearbox every three months. 2. Install rainproof equipment when using the electric chain hoist outdoors. 3. Always keep the parts of the electric chain hoist dry. Please drive the hoist out of the wet, high-temperature, or chemical areas when the operation is finished to keep its performance. 4. The chain’s upkeep. Using oil to lubricate the chain and regularly removing foreign objects from the chain and limit guide group will ensure the chain runs smoothly. 5. To maintain its performance, the chain hoist should be rust-proofed, cleaned, and maintained when not in use for a significant amount of time. It should also be run up and down for one to three minutes.